Sign In | Join Free | My himfr.com
Home > Rotor Pump Mechanical Seal >

Blackmer Industrial Mechanical Seal 45mm For Water Pump

    Buy cheap Blackmer Industrial Mechanical Seal 45mm For Water Pump from wholesalers
     
    Buy cheap Blackmer Industrial Mechanical Seal 45mm For Water Pump from wholesalers
    • Buy cheap Blackmer Industrial Mechanical Seal 45mm For Water Pump from wholesalers
    • Buy cheap Blackmer Industrial Mechanical Seal 45mm For Water Pump from wholesalers
    • Buy cheap Blackmer Industrial Mechanical Seal 45mm For Water Pump from wholesalers

    Blackmer Industrial Mechanical Seal 45mm For Water Pump

    Ask Lasest Price
    Brand Name : YUE MI
    Model Number : Blackmer-45mm
    Certification : ISO SGS
    Price : US $ 166.8-186.8/PCS
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability : 10000/Set/Month
    Delivery Time : 2 word days
    • Product Details
    • Company Profile

    Blackmer Industrial Mechanical Seal 45mm For Water Pump


    Blackmer Industrial Mechanical Seal 45mm For Water PumpBlackmer Industrial Mechanical Seal 45mm For Water Pump


    Blackmer pump mechanical seal for pump Blackmer X,GX,TX3

    1. YM BLK is for GX & X3" pumps
    Used in models: GX3E, X3E, XH3E, TXD3E, TX3E, TX1230A
    For a GX and X and Pumps Used in models: , XH2.5B, TX1.5, TXD2A, TX2A, TXD2.5A, TX2A, TXD2.5A, TX2.5A, TX1220A, TX1225A

    2. Our seals can replace the original seals.
    3.Application: seals are primarily used in the Centrifugal pumps
    4.Standard:the products are in according with Din24960,ISO3069,en12576,API682 standards
    5.OEM and Customized products is welcomed.
    6. Factory Price,High Quality ,Fast Delivery and Best Sevice.
    Blackmer pump mechanical seal for pump Blackmer X,GX,TX3
    Operational Condtions
    Size
    Material
    Temperature:
    -40ºC to 220ºC dependent on the elastomer
    35mm, 45mm 55mm
    Face: CAR
    Pressure:Up to 25 bar
    Seat: SIC
    Speed:Up to 20 m/s
    Elastomer: Vit
    End Play /axial float Allowance:±1.0mm
    Other Metal Parts : SS316, SS304

    Preperation:
    1. Shaft Outside Diameter is within tolerance +-0.05mm
    2. Shaft run out <0.1mm
    3. Shaf end float <0.13mm
    4, No sharp edges on the shaft over the o ring


    Note:
    During the installation,don't scratch or damage the o ring.lf anything is damaged,please contactwith Us to replace a new one.


    Installation in strucstions:
    1. The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.Inorder to avoid damage,don't disassemble and clean the parts again before fixing.


    2 The fitting allowance between the seal and shaft is dl h6 0.8,and there should be leading-inedge at the end of shaft.The outside diameter of shaft at the position of screw should be 01 0.2mm smaller,resisting the screw over-tighten.Lubricate the shaft with oil


    3. Place the cartridge seal into the pump chamber,then:
    A: Tighter four screw bolts of flanges,ensuring the medium leading in hole"G"at the top Position

    B : Tighter four set screws and position the shaft sleeve on the shaft.
    C: Remove four gauge plates.Please keep them and they wil be used in future installation and
    disassemble.
    D: Connect the medium lead_in pipe with hole"G"in order to flush away the friction heat and
    flushing the seal chamber when pump running.


    Note:
    ter complete the installation,turning the shaft by hand to check for the rotationi he shat could not rotate smoothily,seal had been improperly installed.


    We would like lo sincerely ooperale with Clients to supply high qually products and senice We beleve in establishing a long:erm cooperalive relalionshipis lhe key to suceess

    Quality Blackmer Industrial Mechanical Seal 45mm For Water Pump for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: YUEMI
    *Subject:
    *Message:
    Characters Remaining: (0/3000)